Has anyone been able to fit a 225/45/15 on a 15x7 Kosei K1 with a 45mm offset on a [/B]GSR (the key here is the GSR)[/B] without rubbing, I know this works on a ITR

I have talked to Karl (Krshultz) and Drew (evil Drew M) and Chris (WRXRacer111) and they have given me great insight into whether or not the 45mm will fit once i bump up to 225's.(respecting their advice greatly) However, I wan to know if it will work because if it is not going to work, i need to get on the phone ASAP and get the 38mm offset.

Basically i am so confused and cant make a decision that i am just looking for someone to say...THIS IS NOT GOING TO WORK GET THE 38mm or THIS WILL WORK MAY HAVE TO ROLL THE FENDER WELLS...

I am just concerned with rubbing and clearance, first autox is this sunday, so i would need to call umm tomorrow and figure this chit out.

What is going on the wheels as of tomorrow, 205/50/15 azenis, once HPDE's come around 225s will be on there. (starting the road to comp school)

*note these are my track and autox wheels and tires only*

Thanks in advance guys for all the help, and thanks RJ for leaving this thread open


[Modified by AcuraRacer112, 12:18 PM 3/3/2003]

 

Nevermind, RJ kill this thread

 

goddamn riceboyz. Melt those 225's on the burnout pad at hype<FONT COLOR="red">R</FONT>-Fest

 

huh?

 

the 225's will make for good burnouts at hyper-fest

 

leave the poor horses alone

 

Sorry its been a really long day. What i did was I bought the same wheels in 38mm offset, after karl just told me to basically shut up and do this bec he knows it works. I have to send the first shipment back (pain in the ***) oh well.

And i am sorry Ryan i dont know what you mean the only burning out i am going to be doing is when i am in a spin and the tires start to smoke jk

And I left this horse alone, hehe, I just took him out to the back forty and shot him... (Evan )