Anyone know if there's a new link for http://www.speedmount.com? Address doesn't work for me. Looking for a headrest post camera mount.

 

buy here: http://www.ioportracing.com/Merchant...tegory_Code=CM

or make your own with these supplies:
http://shop.store.yahoo.com/cinemasu...mansup3dh.html

 

[URL] http://www.racerpartswholesale.com[/URL]

I couldn't find it on the website but they list a headrest mount in the latest catalog they sent me.

Personally, I use the IO Port mount on my cage.

 

I made my own copycat Ioport mount for under $30 with the same Bogen mount form the local camera store, a piece of scrap sheet steel and two muffler clamps. Works great.

 

or here, fully adjustable, will mount to anything including your headrest:
http://www.bhphotovideo.com/product/5161/BO2910/REG/408

 

http://hybrid2.honda-perf.org/contri...ountintro.html

 

Yeah I was looking at that also. I think I can get everything for about $4 plus $45 for the mount. But I have to build it.... instead of paying $140 for one

 

I built that one and took me about 30 minutes. Worked great for the 2003 season.

 

has any one used this: http://shop.store.yahoo.com/ci....html

setup by any chance?

i'm wondering if the lack of a rubber base to absorb some of the vibration from an harness bar would affect the image quality as compared to the ioport setup.

also note that the head mount unit is quite a bit of a ways raised above the base clamp -- thus increaseing the possiblity of amplifying the vibrations (?).

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by EKhatch &raquo;</TD></TR><TR><TD CLASS="quote">


http://hybrid2.honda-perf.org/contri...ountintro.html </TD></TR></TABLE>

I built a headrest mount and decided the view was too low, so I built this one instead:
it uses the mount points that the back seat handles would normally use. great view, I just need to figure out a way to pad it a little more for vibration.

 

I made my cage harness bar mount for about $10.

works well, My camera needs a wide angle lens though.

I don't think I have any pics, but I'll post a movie from it..