Possibly FS H22A 98 hatch
Thread Starter
Honda-Tech Member
Joined: Jun 2001
Posts: 1,301
Likes: 0
From: OKC, USA
Possibly FS H22A 98 hatch
I am wanting to sell the car if the price is right.
It is 98 Silver CX hacth with about 19,000 miles on the chassis
95 H22A motor about 45,000
Outside appreance
1)Fiber Image carbon hood
2)Honda opt. front lip
3)Rota slipstream black 15x6.5 with pirelli p-770-z 95% tread left
Inside appreance
1)5 point mild steel roll cage
2)Del Sol seats, black with grey strip
3)spraco 4point harness
4)momo wheel black (racing line)
5)spoon **** black
6)custom dash with all the auto meter gauge in the dash fuel, oil press, temp, volt, and rpm and the shift light.
7)99 climate control with the V-AFC mount in the dash.
8)sparo pedals
Engine
1)solid motor mount
2)Greddy header and custom exhaust that look stock
3)cheap *** intake polished
4) xs fuel reg. and all stainless steel fuel lines ran Walbro 255 intake pump
5)Act 2600 pound strip street dics
6) Jun light wieght flywheel the clutch and flwheel have about 50 miles on them
we installed it then I bought some cams so the head has been at Machine shop
7)head port and polished and a 5angle valve job
8)skunk2 stage 2 cams never installed brand new in the box
9)skunk2 valve spring kit brand new in the box
10)skunk2 Titanium retainer set brand new in the box
11)brand new head gasket from honda
Suspension
1)ground control coilover
2)koni adj shocks full sleeves
3)energy suspension bushing all around
4)cusco under straut bars front and back
5)Brembo front brakes and goodridge brake lines.
Bogart 13x7 with MT 70% tread left.
I think that is it
The car set in the garge and is only taken out on the weekend if the weather is good.
Please tell me what you think this car is worth, I will get picture ASAP
The car also dyno out at 193@ whp at Redline in Texas last summer
No cams, clucth, or flywheel
It is 98 Silver CX hacth with about 19,000 miles on the chassis
95 H22A motor about 45,000
Outside appreance
1)Fiber Image carbon hood
2)Honda opt. front lip
3)Rota slipstream black 15x6.5 with pirelli p-770-z 95% tread left
Inside appreance
1)5 point mild steel roll cage
2)Del Sol seats, black with grey strip
3)spraco 4point harness
4)momo wheel black (racing line)
5)spoon **** black
6)custom dash with all the auto meter gauge in the dash fuel, oil press, temp, volt, and rpm and the shift light.
7)99 climate control with the V-AFC mount in the dash.
8)sparo pedals
Engine
1)solid motor mount
2)Greddy header and custom exhaust that look stock
3)cheap *** intake polished
4) xs fuel reg. and all stainless steel fuel lines ran Walbro 255 intake pump
5)Act 2600 pound strip street dics
6) Jun light wieght flywheel the clutch and flwheel have about 50 miles on them
we installed it then I bought some cams so the head has been at Machine shop
7)head port and polished and a 5angle valve job
8)skunk2 stage 2 cams never installed brand new in the box
9)skunk2 valve spring kit brand new in the box
10)skunk2 Titanium retainer set brand new in the box
11)brand new head gasket from honda
Suspension
1)ground control coilover
2)koni adj shocks full sleeves
3)energy suspension bushing all around
4)cusco under straut bars front and back
5)Brembo front brakes and goodridge brake lines.
Bogart 13x7 with MT 70% tread left.
I think that is it
The car set in the garge and is only taken out on the weekend if the weather is good.
Please tell me what you think this car is worth, I will get picture ASAP
The car also dyno out at 193@ whp at Redline in Texas last summer
No cams, clucth, or flywheel
Thread Starter
Honda-Tech Member
Joined: Jun 2001
Posts: 1,301
Likes: 0
From: OKC, USA
Thread
Thread Starter
Forum
Replies
Last Post