Ericks Racing uses Alaniz. I've heard of Portflow. Anyone have comments?

 

Check out http://www.dprracing.com

Dan does awesome work, and has great customer service.

 

Im supraised he didnt say http://www.PortFlow.com

 

Anyone with a modded head?

 

Gotta recommend Portflow, that's all my friend's shop and I use... I've never seen or worked with Alaniz but i'm sure they do good work too... They have a 12 sec full interior daily driven EK, DC, and EG... The EG wasn't as impressive because of the chassis it was in, but still.... On Kenny's motor who owns the shop, he had a GSR sleeved to 84mm with 9.0:1, Crower rods, Portflow head, Hondata, Rev Hard stage 2C straight T04 turbo and on 22lbs made 505whp for is daily driven EK.... He sold that motor now and is building a new one I still have to take some pics of a JG port job compared to a Portflow... I hate JG **** so it makes me feel better when you see the difference.... Portflow Peace

 

portflow all the way baby tom kicks *** you cant smote his work we have ported/polished many heads and never once have we been even a slit bit unhappy.

 

i have the JG head...wish i got the PortFlow...oh well..least i help out a friend...

 

Thanks guys! I'm going Portflow! What's the best stage for a daily driver?

 

I would say These Guys http://www.hondaraceengines.com
Profesional race guys that Got into Honda engines

 

do they actually cut of the top of the manifold to port&polish it (then re-weld it) or is that just for show purposes???

 

NM i found out myself...

looks like Freankenstein's head..!


[Modified by 10K2HVN, 5:00 PM 1/19/2003]

 

They have found alot of power in the manifolds the shape of the runners and plenum

 

What does a moderate port job cost from Portflow

 

is there anyway that they can cut it from the bottom...? it looks really ugly like that..like you just ate monkey brains or something..

 

They offer the weld left on or ground clean and sand blasted alot of poeple like the weld look

 

If you don't want ur manifold cut check into Extrude Hone... They do some bad *** work but it's pretty spendy for the gains unless you are building a race motor etc. I really wouldn't worry about doing so.. Peace http://www.extrudehone.com/

 

yeah checked that out already..looks way too expensive for my budget...
...probably just gonna get a JG Intake Manifold since i have their head already.. wanted the skunk one with a portflow head but...jesus..talk about buyers remorse...


[Modified by 10K2HVN, 7:34 PM 1/19/2003]

 

extrude hone works on turbo's and mustang manifolds. But that about it to get the desired shape u have to grind any ways that my 2 cents

 

I give my recommendation to Head Games Motorworks. Dave there does awsome work having done a couple of head combinations for my car last year, as well Team Bullish benifitted from Daves talents breaking into the 6's with his head work. His pricing is great $850 for a full port with valve job for B series. Flow bench print outs are also available give him a call (609)586-0354.

 

Hello everyone,
i got my JG HEAD on and running!!! dont have many mods to it but all i have to say is thats it runs soooooooooo much smoother!! i think also because of the ECU that i got from iH8RICERZ...lets just say thats it feels like it glides through the gears like a hot knife through butter... ...not to bad i guess...i still want the PortFlow Head but this turned out pretty good too.. i probably wouldnt have noticed the difference anyways but im sure the dyno would later...

 

DPR Dan Paramore Racing!

 

LOL!!! i just thought of something!! Since i have a Frankenstein motor (CR-Vtec) i should get this Manifold to complete the *look*! hehe