FS: B-series performance stuff in NJ ...
Thread Starter
Honda-Tech Member
iTrader: (2)
Joined: Mar 2002
Posts: 5,828
Likes: 1
From: Woodbridge, NJ, Middlesex
1) 5 reprogrammed P28 OBD1 ecus - programs of your choice to match - anyone $250
2) Toda Racing brand new street clutch kit - $500 neg.
3) newly built LS/VTEC longblock built wiht Endyn pistons and eagle rods (complete bottom end) - $2400
4) Used Toda Racing header (used to start up my racecar so it has discoloration and slight scratch on bottom - $925
5) 96-98 OBD2-OBD1 ecu adapter harness - buy with ecu for $200 or separate for $230
6) system for CRX, has 12" subs 2 mids and 2 tweeters and amp and cd/radio deck - $250
7) bogart 13 x8 dragonfly wheels and 13x7" slicks - $600
8) Summit Racing fuel cell brand new - $75
9) 3 complete b16a shortblocks, 1 has blown piston - $200 each
10) sleeved LS blocks with 84.5mm Endyn pistons and Eagle rods with 97 ITR head with Toda Racing valvetrain + cams of your choice, $make offer
11) Full race 16:1 compression race motor, GSR block with 86mm sleeves, GSR head and Toda Racing Killer camshaft kit - gulp $15K
free bumps please ...
Email or PM if any questions or interests.
Greg
2) Toda Racing brand new street clutch kit - $500 neg.
3) newly built LS/VTEC longblock built wiht Endyn pistons and eagle rods (complete bottom end) - $2400
4) Used Toda Racing header (used to start up my racecar so it has discoloration and slight scratch on bottom - $925
5) 96-98 OBD2-OBD1 ecu adapter harness - buy with ecu for $200 or separate for $230
6) system for CRX, has 12" subs 2 mids and 2 tweeters and amp and cd/radio deck - $250
7) bogart 13 x8 dragonfly wheels and 13x7" slicks - $600
8) Summit Racing fuel cell brand new - $75
9) 3 complete b16a shortblocks, 1 has blown piston - $200 each
10) sleeved LS blocks with 84.5mm Endyn pistons and Eagle rods with 97 ITR head with Toda Racing valvetrain + cams of your choice, $make offer
11) Full race 16:1 compression race motor, GSR block with 86mm sleeves, GSR head and Toda Racing Killer camshaft kit - gulp $15K
free bumps please ...
Email or PM if any questions or interests.
Greg
Thread Starter
Honda-Tech Member
iTrader: (2)
Joined: Mar 2002
Posts: 5,828
Likes: 1
From: Woodbridge, NJ, Middlesex
thanks for the bumps everyone, appreciate it !!!
I just assembled the race motor this last week, LOL we put it in my street del sol, I programmed a custom eprom to run it on a P28 ecu, gonna try it out on the street to put some mileage on the rings to get them to seat then hit the dyno. It has the TWM ITBs on it running on the honda computer and my program, the setup comes with tranny and all for $15K ... its a deal considering whats all included and it'll be tuned on the dyno, all someone has to do is slap into their race car and man that thing will fly.
I also have a stock 89 CRX Si I was thinking of putting it in there for ***** and giggles, but I hae to put together a tight geared YS1 tranny to do so and get a mount kit, got no time man cause been busy with the race car to do some test runs at ATCO.
Greg
I just assembled the race motor this last week, LOL we put it in my street del sol, I programmed a custom eprom to run it on a P28 ecu, gonna try it out on the street to put some mileage on the rings to get them to seat then hit the dyno. It has the TWM ITBs on it running on the honda computer and my program, the setup comes with tranny and all for $15K ... its a deal considering whats all included and it'll be tuned on the dyno, all someone has to do is slap into their race car and man that thing will fly.
I also have a stock 89 CRX Si I was thinking of putting it in there for ***** and giggles, but I hae to put together a tight geared YS1 tranny to do so and get a mount kit, got no time man cause been busy with the race car to do some test runs at ATCO.
Greg
Trending Topics
Thread Starter
Honda-Tech Member
iTrader: (2)
Joined: Mar 2002
Posts: 5,828
Likes: 1
From: Woodbridge, NJ, Middlesex
bump for nice ****, i want those slicks but that is kinda rich for my blood
I also trade, so if you have good stuff, pm me with trade offers.
greg
bump, ill be calling you about that tranny!!! nice toys, im almost tempted to buy the B16 shortblock for the ehad and start saving up parts for my LS/Vtec, patience has never been a virtue of mine lol
Thread
Thread Starter
Forum
Replies
Last Post
CHEETAH
For Sale
4
Nov 15, 2010 06:14 PM
CHEETAH
For Sale
59
Feb 10, 2005 06:27 AM
CHEETAH
For Sale
1
Sep 27, 2002 06:10 AM



, speechless
