I am planning on doing a motor swap and just now found a motor. It is in a 1993 Integra GS, yes GS but I am wondering if this is the same as teh LS, Integra guy says gs and ls is just interior and exterior stuff, but I want to make sure. And will I need to swap out hubs off of this or will the axels go into mine perfect fit no problem? And if someone will PLEASE send me a whole parts list of what I will need off of the Integra. Smith4987@aol.com instead of here, well post one here and send me a copy please.

THANKS!
JOSH

 

The GS and LS both used the B18A1. So yes they use the same motor.

 

http://www.hasport.com/Tech/Installs...0partslist.htm

 

keep in mind that a 93 b18a1 is obd-1.....i would shoot for a 90-91--less hassle.

 

The motor would be fine to use. Just get 90-91 non-OBD injectors, distributor and ECU for a plug and play swap.

 

axles will fit if you pop off the dust seal on the si

 

Or just convert to obd-1 it's easy, and you can use the injectors and dist. off the teg engine.

 

get 88-91 injecctors, fuel rail, ,dizi, and you'll be fine.
hasport moutns that I am selling.
hasport shift linkage
axles
ecu