I picked up more injector resistor. These kits are required in order to run big low-impedance injectors such as the DSM450's, MSD, RC, etc.
<FONT COLOR=""red"">
OBD1 kits are: $35 shipped
OBD2 kits are: $44 shipped
Injector clip kits are: $15 shipped
</FONT>

The fuel injector clips are all Honda/Acura clips, DSM clips, or Nissan 300ZX turbo clips. All of the above clips work and are OEM quality.

Please see my web site for more details --&gt; http://www.muller.net/sonny/resistorbox

I prefer paypal (sonny@muller.net). Kits ship on Tuesdays and Fridays.

Thanks,
Sonny



[Modified by Sonny, 11:18 AM 1/26/2003]

 

imed you


Rob

 

bump for a good guy


Rob

 

Sonny,
I have an OBDII B18B in my 95 Civic EX, running an OBDI P75 ECU. Which kit would i need?
Thanks, Jay

 

sonny i need resistor box how much?

 

JV: You would need an OBD2 kit unless you used the Civic's engine wiring harness. It sounds to me like you used the Integra's engine wiring harness and then used an adapter harness at the ECU?

turbod16y8: $35 shipped.

Please e-mail me with any more questions.

Thanks,
Sonny

 

My car is OBDI so i didn't need an adapter for the P75. The used the OBDII LS wiring harness that came with the motor. Plug and play...
Would i still use the OBDI kit?
Thanks, Jay

 

sonny do you have a pic of how it look like? i see some resistor box with just a harness clip with no wires comming out of it and some with wires comming out of it. which one do you have?

 

JV: You need the OBD2 kit since you used the OBD2 LS engine harness. That means that you have OBD2 fuel injector clips that do not work on DSM/aftermarket injectors.

d16y8: Here is a pic of the typical kit:



Sonny


[Modified by Sonny, 6:33 PM 1/4/2003]

 

How come your resistor box looks different from this one.I want my setup to look clean like this.Im iterested in the obd1 kit for my 92hb.PM or email me.Thanks.

 

That resistor box comes off of the later Integras, Preludes, and Accords. Those are harder for me to get and I typically do not get many of them.

They are prettier to look at, but functionally, it is exactly the same as the other resistor box. All of the resistor boxes that I sell have a tab on them to make them real easy to mount (typically on the firewall). The "heatsink" style box requires modification to the bracket to make it fit against the firewall. JT (that is his car pictured above) did a very clean (as usual) install of the box.

Sonny

 

Hmm im very interested in a set.How well are the instructions,i seen some on club si that had all kinds of pics,its just i dont want to mess anything up hehe.Pm your adress and i'll send a mo to after wed because i'll be in california early this week.I need the obd1 package.Thanks

 

3 kits left in stock.

OBD2 kits are $44 shipped.
OBD1 kits are $35 shipped.

I have 1 of the heatsink style resistor pack and 2 of the smooth style.

Sonny

 

Sending payment for injector clips only tonite!

 

See info at top of page.

Sonny


[Modified by Sonny, 11:20 AM 1/25/2003]

 

Sonny have you received my MO for the heat sink resistor kit?

 

It came yesterday and your kit left today! You should have it in 3-4 days.

Sonny

 

Sweet thanks alot,cant wait til i get it. for the fast shipping.

 

Jamie, Chris, and Thong...your kits left today. Check your e-mail/IM for tracking numbers.

Gerardo and Chris F, your kits left yesterday via USPS 3 day air.

4 kits left!

Thanks,
Sonny

 

Sonny, I have a question. On my 92 teg B18A (OBD-1), do I need the clips as well as a resistor box to run DSM 450cc injectors? I'm interested in a resistor box regardless!

Zach

 

Zach,

You do not need the clips for your car. The OBD1 clips work fine for aftermarket and DSM injectors. You just need the resistor box/diagram kit (OBD1 kit).

Please e-mail me if you have any more questions.

Thanks,
Sonny

 

pm'ed you.

 

Just paypal'ed you.

 

2 kits left...

Sonny

 

up up for a great seller and fast service thanks