I would like to know what the most HP verified by someone running Hondata?? I dont want to know what someone claimed but what has been proven on a dyno sheet or what has been seen.

 

I made 500.5whp and 333.4 ft-lb torque 25psi Hondata Stage 2B This is a B16A 84.5mm Bore, will have new dyno #s in this coming month with some new changes and upgrades.


[Modified by Boostfed, 12:21 AM 12/18/2002]

 

there was a guy hondata used for research and development who made 500+. i can't remember his name but someone else on here will remember him. he posted occasionally. rocky something? awshit, i don't remember.


[Modified by jinxproof99, 1:51 AM 12/18/2002]

 

Rocky later switched to Haltech though.

 

I made 485 whp @ 8400rpm but I had to stop there because my injectors were static. 550cc

 

haltech

 

And that later put down like 625 whp.

 

I made an easy 333fwh with Hondata stage 4 and ran out of fuel on my 550cc. If it wasn't for the small injectors and small i/c and i/c piping I would be making more. I don't feel like spending another $2500 for 150 hp. Go to their web site.

 

 

xes put down over 500 whp on a mustang dyno up in canada, his site currently isnt working but after you do the mustang conversion factor and the altitude, the h23a motor puts out roughly 650+whp with the 4b.

 

Here's my thoughts....every standalone will tune the same and make the same HP...it depends on which one goes finer into teh powerband(250rpm increments)...it's all on how the tuner messes with the car

 

last dyno i seen of that car made 491whp on a mustang dyno @ 3500' above sealevel. but he could have been back to the dyno for more!

 

he updated his site and had a bunch of dyno graphs on there, but its not working anymore. like i said after you take into consideration it was a mustang dyno and factor in the elevation its over 650whp. pretty nuts for a h23a