If you have a pretty quick all motor gen 2 post your times. I'm currently 13.7@99mph...stock header, stock exhaust LS/VTEC

 

im not that fast, but im fast enough to post it up LOL.. 15.0 @ 91mph. Intake/Exhaust.

 

I smell weight reduction & slicks!

 

i got on Nitto 450's and no weight reduction..dunno about the other guy. but props.

 

ok i smell sothing funny you said you got a 13 something how can that be with a full interior and only your minimul mods. i was at the track last night and could only pull off 16.2 to 16.5 with no fron seat and no speaker box. mods are crower 402's and aem adn rsr exhust. not to mention that there was a guy named mike in a gsr who with no front seat no back lower seat itr block and mild cam advance pulled off 14.80's something is fishy. here

 

Learn how to read the forums!! He said he ran a 15.0, not a 13sec. Not the same username!

and, its very possible to hit better times than you. When my car was stock I was able to run a 15.6 on 17's. I recently ran a 14.5 with a stock tranny and nice valvetrain mods.


[Modified by teg92, 7:01 PM 11/30/2002]

 

It's HOW YOU DRIVE YOUR CAR. practice makes perfect. i was hitting high 15's couple months ago with these same mods. after a worn clutch and tires, i finally learned how to launch and get better times.

 

Nah... "its not how you drive your car, its how you stand by your car!"

 

lol haha

 

I went to the track once with my car weighing 2,350 lbs and ran a shitty 15.4. My 60 ft was terrible! 2.6 sec!! I had the stock tires on at the time. With a respectable 2.3 sec in the 60', I would have ran 14.8. Each 0.1 sec in the 60'=0.2 sec in the 1/4 mile. The clutch is also the original clutch with already started to slip.
Only mod for power was an intake.
I know thw car can run a lot faster with just better tires and a new clutch.
Also, I am not too concerned about 1/4 mile times. I am building the car for autoX.
My next mods include clutch, FW, LSD and better tires.

 

not bad, glad to see another g2 gsr.

 

Vtecb17a is well known members for his all motor GSR beast. Anyone doubting his time should not be here.

 

Thank you.

 

why would anyone doubt a 15 flat...do you think that's fast???

 

13.7s is a good time. The quickest 2nd Gen, I have seen with a B17A was Curtis Boodoo from Hyatt, MD he ran a 13.5@107mph.

 

why would anyone doubt a 15 flat...do you think that's fast???

I never said it's fast. but it's good enough with BARELY any mods.

 

what was yuur 60' time?

 

2.38 60ft time

 

<---------- Needs to get his all motor DB2 to the track soon

 

IB built a 2.0 L turbo motor for a customer with a g2. he was running 400whp on 6-8 lbs of boost. i cant remeber how much psi it was though

not n/a but still really fast

 

Trust..

that wasn't on a b17a, that was on a LS/VTEC.

vnt

 

Apparently Eugene, in the MTV True life documentary, runs a high 12 in high 4 door ls/vtec Integra? Personally, I ran a 15.2 a 90 mph, with 2.2s 60 fts in my 92 Rs with a Stock b18a that had 220, 000kms on it. All I had was a clutch (CM Stg 3), flywheel (CM), Intake, Exhaust, and Fpr. I did a little weight reduction and the car weighs in a 2380 w/o driver. I snapped my shifter fork about a week ago, so I decided to throw in a b16 and turbo it this coming summer! Lookin for low 13's.

 

I saw Eugene running in the IDRC event held @ LACR (palmdale, ca). Dunno if it was his best time, but I saw him run a 13.7. That's definately good enough for at least low 13s sea level corrected.

-Rod

 

on that mtv show eugene's car was pretty fast

 

i ran my car at LACR too, worst ****** track ever..i hate palmdale. i still gotta 15.0