Will a 4-1 dc sports header fit onto a 95 GSR without any mods?

 

depends on if it is made to fit a 1995 gsr...dc makes a 4-1 or 4-2-1 header for almost any car, any year.

 

I have heard that DC headers hang low, in turn scraping on low clearances, can anyone confirm this?

 

There should be no problem at all. The 4-1 is a little bit lower then the 4-2-1.

If you're careful, it should be fine.

 

 

careful is for people with working headers hehe

Here's a great low hanging 4-1 shot for ya



This photo is from https://honda-tech.com/zerothread?id=345373
if you see B94Cast, pat him on the back for his misfortune. it happens to the best of us.


[Modified by IntEGNYC, 7:17 AM 11/28/2002]

 

here is my DC 4-1 scrapped it abit too

 

it'll fit w/o any mods if you get the model thats made for the car..

on the low issue.. if your careful you'll be fine.. but don't expect to have a totally scrape free header... once in a while you can't avoid it and will have a small scratch/dent on it.. but if your careful you'll be fine and it won't cause any huge damage.. just a cosmetic scrape...