Hello, Im swapping out a worn 238k motor (burned exhaust valve) on my "16 CRV and the 3 wire plug for the CVT speed sensor on the top back of the trans had the wires pull out. Any one have a pinout diagram for this with wire colors at all so i can re pin the plug? Thanks

 

1 White VEL_DD
2 Gray SG2
3 Tan VCC2

 

thanks, is there a way to verify what pin is 1 or 3 on the actual plug or CVT speed sensor?

 

It is from left to right (1,2, 3) from the terminal side of the wire harness connector.