So I'm newer to the H series scene and I have a lot of questions. So I have a Redtop H22a according to my engine stamps. I rebuilt the motor installed a bigger skunk to can and some bigger injectors, my compression is great, my spark is wonderful, but since the rebuild my injectors aren't getting any power even after putting a noid light on all 4. My first assumption was obviously the main relay, the original was infact broken so I replaced it. After the replacement the fuel pump started working but still no injector pulse, not even making it to the injectors. It is good to mention this is swapped into an EJ1 but I felt the question would be better asked here. If anyone has any ideas or comments good or bad please let me hear them thank you!