Hello guys , I recently purchased for my 96-98 ek , some facelift seats rear and front , rears are all good , although some modification need to happen.
the front right (passenger) is also good and secured. The problem lies with the driver's side.

So the outer slider was out of the seat and its not secured. , I am not sure what to do or what do I need in order to make it work.

I will attach some pictures.
This is how it currently is.
For now I have my s2k seat for the driver side , so that's all good. but I have got to fix it.
There is a chance to find maybe a replacement 81260-S04-J01 , but its a very long shot and money which I would like to save but if I have to , I will get it.
They told me its missing some stoppers.
If you let it go from the top as seen in the pictures it just goes through does not stop do anything like its suppose to I guess.

Any advices , any repair parts or part numbers or something similar I could find in the market.

 

Purchase another civic seat from the junk yard and swap the rail

 

sadly , where I am from those are extremely rare and expensive nowadays , I might have sourced some rails / brackets , but not sure if those are going to fit. in theory they should but , we have to test them next week. Other than that , is there something else I could do?
I think the stoppers are like some coils , or some plastic bits? not quite sure.
Its very hard to find seats like that. travelled over 500km to just find them

 

https://www.ebay.com/itm/33562271749...mis&media=COPY

 

Saw those , before , sadly it will too big of a cost , due to me being in Greece , so import taxes customs and whatnot..
Just a quick questions , are those supposed to be stable? or they are suppose to move? and somehow be locked? Just trying to figure out what could be wrong with them?
Again I might have sourced locally , once I return to my city but trying to figure it out

 

The slider handle that you use to move the seat back and forth has teeth that lock into the part of the rail to lock it into position.

They are vehicle specific, so you’d either need to find another seat, or take parts off an existing seat rail that work to make them fit

 

Oh , I see thank you , will try to source some then!