So I’m trying to get new rear hubs for my eg hatch, but I’ve tried 2 sets, and both sets are too big for the spindle. It’s a 93 Dx hatch, rear disc (not sure if factory). The wheel bearings I got are 29.5mm inner diameter, but he spindle is 28mm. What hubs do I need?

 

Here’s a pic of the trailing arm. Maybe someone can identify it and tell me what hubs I need? Also a bonus if anyone could tell me what coilovers these are.

 

That’s not a stock hub plate. The hardware bolts are a dead giveaway. As for the coilovers….eBay junk.

 

I just want to know what hubs I need for it. The spindle is 28mm

 

What NVTurbo is trying to say is that you DO NOT have factory disc brake hubs... those are some type of conversion plate, so you need to find out what brand conversion kit you have and then ask that company what wheel bearing part number you need to repair them.

 

Guys...thats a scarebird disc brake conversion bracket.

You need the hubs for a drum brake. The spindle is smaller.

Cheers 🍻

​​​​​

 

Thank you, that’s what I needed lol

 

Well done theYBLEGAL !!!