Hello Guys!

So, I have this concern for about a year now, since then, I have not yet resumed my project as stated above (title).

I got these JDM power side mirrors with a retract function as a replacement from my stock mirrors. I got hit so I decided to upgrade those.
The seller sent me a well functioning mirrors and its power folding (tested the mirrors directly from 12v supply. I also have this power switch with built-in relay.
The model of the switch with built-in relay is s9a j1110 m1 (made by ALPS). On the back of the switch there comes these wires which is what I need to figure out.

Looking at back side of the switch, connector lock on top, the arrangement of wires are as follow;

First Row, Left to Right:
[Black with Single Silver Dash] [Black/Yellow] [Vacant] [PIN LOCK] [Black with Double Silver Dash] [Green./White]

Second Row, Left to Right
[Black with Double Silver Dash] [Red/Blue] [Red/White] [Red/Black] [Blue/Black] [Red/Orange] [Turquoise/White] [White/Red]

For better appreciation, I attached the image of the switch for reference.



Can someone help me with the wiring diagram? I can do laying, connecting wires etc. But for the diagram, I searched everywhere but to no avail.

Thanks!