FS: Hardrace EG/DC pillowball front upper camber arms
Thread Starter
Honda-Tech Member
Joined: Aug 2020
Posts: 50
Likes: 7
From: Oakland, CA
FS: Hardrace EG/DC pillowball front upper camber arms
SOLD SOLD SOLD
Asking $100 picked up in 94608.
These arms were used for about 15 hours of track use and ~500 street miles before I upgraded. They never slipped on me and gave me plenty of camber range, but I wanted something with a different geometry to play with caster settings.
Link to product with $309 new price: https://www.buyhardrace.com/product/...tegra_267.html
Pics:
These arms were used for about 15 hours of track use and ~500 street miles before I upgraded. They never slipped on me and gave me plenty of camber range, but I wanted something with a different geometry to play with caster settings.
Link to product with $309 new price: https://www.buyhardrace.com/product/...tegra_267.html
- All sphericals are still very tight.
- Arms are used and somewhat dirty.
- There is some slight surface corrosion on the camber-adjusting bolts.
- Ball joint boots are not ripped.
- There is a very slight (normal) grease/dirt build up between each boot and the snap ring, since these are not quite as tight a fit as OEM UBJ boots.
- I lost one of the bolts, so I replaced it with a Class 8 flange bolt from McMaster.
Pics:
Last edited by afm; Jun 24, 2022 at 11:32 PM.
Thread
Thread Starter
Forum
Replies
Last Post
JDMCRX
Suspension & Brakes
10
Apr 11, 2013 04:57 AM
offcamber
Road Racing / Autocross & Time Attack
49
Apr 10, 2010 09:05 AM