Out of curiosity, on the JDM 96-97 4x114 brake rotors, does anyone have part numbers on them? Or are you just supposed to order Gsr rotors and re drill them. Curious as to what anyone has found as far as replacements here in the states. Thanks.

 

The most common thing to do is to upgrade to the larger 17cl15vn caliper and 11" rotor from the 96 prelude vtec.

 

Is that the one you have the shim the bracket to get it to line up right?

edit: nvm, that’s the one you don’t have to shim anything. I’ll just do that then. Thanks! Hopefully I’ll find something on the rear as well.

 

You might have to, you might not. I did have to add a washer between the knuckle and caliper bracket using 96R knuckles and 96 Prelude VTEC rotors.

 

Upgrade the rears, and if finding ITR rear calipers are an issue, you can use RSX/Ep3 rears instead, but you will have to bleed the calipers upside down.
https://www.typerclub.org/forums/viewtopic.php?f=8&t=31