I have a vtec malfunction code and a tps code. I replaced the tps and cleaned the throttle body itself and cleared the code and reset the car to relearn the tps but before I did all this my car rps we're struggling when I accelerate they would still climb but slowly and kind of bumbly if that makes sense. But now it's worst and putters when I first accelerate and won't go past 2k or 3k on rpms but it idles at 1k then after a bit down to 500rpm and I believe I a idle control valve code I have to check again tomorrow but I need any knowledge and any help it's my only way to and from work doing HVAC and on my own and without my car I got nothing from not being able to get to work lol