When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
Everything you need to give your 80's and 90's Honda Civic, Del Sol or CRX a set of rear disc brakes.
Included are:
1x used 2040 prop valve off a 1988 Honda Integra (EDM)
2x used Honda OEM rear hubs off a 1994 Civic Si. These have the mounting points for the calipers. Simply remove the 4 T50 bolts on your hubs and swap them over.
2x BNIB Centric blank rotors
2x remanufactured Duralast calipers for 1991 CRX Si
2x BNIB Raybestos parking brake cables for 1991 CRX Si
2x BNIB Centric brake hoses
2x BNIB trailing arm bushings
You will need to buy pads, but this is otherwise a complete setup for rear.
I also have some used eBay no-name toe adjusters that came off some arms I bought. The arms are junk, but you can have the toe adjusters.
You have to buy the entire kit. I will not sell parts of it. If you think you can make more money splitting this up, be my guest.
Receipts can be provided for everything on this list, asking $400 on my cost of $525. Located in Austin, TX. Can ship, but you are paying and this stuff is heavy.
Disc hubs, detached from trailing arms. 2040 proportioning valve from an Integra Trailing arm bushings and brake hoses. E-brake cables, calipers, and rotors Verification.
Last edited by Ducky216; Dec 26, 2021 at 08:36 AM.
Reason: Location and shipping.
Facebook is a disgusting mess. And we'll be losing the treasure trove of information if we don't keep these forums up.
Yes, it was terrible when all the forums were bought out, AND it's not fun to watch the scripts on the main page crash the site - but it's better than being dead and inaccessible.
[SOLD] CRX Si Rear Disc Swap
re: [SOLD] CRX Si Rear Disc Swap
