Tech / Misc Tech topics that don't seem to go elsewhere.
Sponsored by:
Sponsored by:

D16 won't go past 5700-6300 intermittently

Thread Tools
 
Search this Thread
 
Old Mar 25, 2021 | 07:30 PM
  #1  
427D16's Avatar
Thread Starter
Honda-Tech Member
 
Joined: Oct 2019
Posts: 6
Likes: 0
From: ABQ, NM
Default D16 won't go past 5700-6300 intermittently

Been trying to diagnose a issue where the car looses all ignition and fueling on my turboed d16y8. Almost like hitting boost cut but never got any where near boost cut parameters of 25 psi. Wonder if anyone might have any ideas what to go for next.

No check engine light
voltage reading on hondata is between 14.1 to 14.3
oil pressure is around 25 to 30 idle and 85 to 90 near 6000 rpm
Checked all grounds and they were secure
wideband reads 10.2 to 10.5 at full throttle on e98 and fuel pressure is normal.
Changed spark plugs and wires already
checked vtec solenoid and it was actuating and screen was clear.
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
fi_ickenfast
Engine Management and Tuning
3
Dec 29, 2013 05:56 PM
fi_ickenfast
Engine Management and Tuning
17
Dec 21, 2013 09:45 PM
I CRX I
Forced Induction
18
Sep 25, 2009 07:04 PM
ToneDX2049
Forced Induction
2
Mar 4, 2007 10:20 AM
1.8EG-T
Forced Induction
1
Aug 28, 2005 12:52 PM




All times are GMT -8. The time now is 08:18 AM.