So I have a 2005 accord 2.4l ex 2 door that this week started giving me problems. It started Monday when I got a P0303 error (cylinder 3 misfire). Cleared the code with my little tool and was on my way. as the days passed, it started giving me start up problems that sound just like if the timing belt jumped a tooth, but eventually will startup take a few seconds to “catch” and then it runs smooth. Today when I went to leave work, I tried to start it and it acted like all the valves were closed and the starter would stop after a second. after about the fourth attempt to start it, It started spinning the motor, engine started firing and again the hesitation was a lot. After about 6 or 7 seconds of hesitation, it “caught” and Idled fine. I drove my 25 miles home with no issue. Any Ideas as to where to look as I am new to this engine.