SC 2000 Civic Hatch
I have for sale my 2000 civic EK. Car is a street car, that is freshly tuned and runs hard. Here are the build specs on the car
2000 hatch LSV
-Motor:
Eagle rods
Wiesco 9.1 comp
ARP headstuds
Stock reman b16 head
3 bar maP
GSR cams
Neukin mini ram turbo manifold
Garret 60 trim turbo
Precision 500HP intercooler
New seals all around in motor
New timing belt/water pump kit
-Fuel:
Southbay 1200cc injectors
Tial 38mm waste gate
Walboro 450
-Electronic:
Hondata s300
3 port boost solenoid
-Transmission:
GSR trans with MFactory LSD fully rebuilt, new seals, bearings, and synchro tech carbon synchros
Competition Twin Disc
-Suspension:
Blox competition coil overs
Skunk 2 LCA
EK Si subframe with new bushings
Skunk 2 front and rear camber kits
-Wheels:
RPF1
Toyo R888s 225/50/15 up front
Kumho Ecsta 225/50/15 in the rear
Car makes 420whp/ 270torque. It stays with my 600whp CTSV from 50-120 to put that into perspective.
It’s a fun car and has full boost at 4k, and carries it to 8500RPM.
I know as all projects, I won’t ever get my money back, but most parts were bought new and I have receipts for most of them.
Looking to get $7800 OBO
Locates in Greenville SC
Can negotiate price some without the wheels and tires
Looking for cash only.
message me at 8649829915
2000 hatch LSV
-Motor:
Eagle rods
Wiesco 9.1 comp
ARP headstuds
Stock reman b16 head
3 bar maP
GSR cams
Neukin mini ram turbo manifold
Garret 60 trim turbo
Precision 500HP intercooler
New seals all around in motor
New timing belt/water pump kit
-Fuel:
Southbay 1200cc injectors
Tial 38mm waste gate
Walboro 450
-Electronic:
Hondata s300
3 port boost solenoid
-Transmission:
GSR trans with MFactory LSD fully rebuilt, new seals, bearings, and synchro tech carbon synchros
Competition Twin Disc
-Suspension:
Blox competition coil overs
Skunk 2 LCA
EK Si subframe with new bushings
Skunk 2 front and rear camber kits
-Wheels:
RPF1
Toyo R888s 225/50/15 up front
Kumho Ecsta 225/50/15 in the rear
Car makes 420whp/ 270torque. It stays with my 600whp CTSV from 50-120 to put that into perspective.
It’s a fun car and has full boost at 4k, and carries it to 8500RPM.
I know as all projects, I won’t ever get my money back, but most parts were bought new and I have receipts for most of them.
Looking to get $7800 OBO
Locates in Greenville SC
Can negotiate price some without the wheels and tires
Looking for cash only.
message me at 8649829915
2007 350z 113k miles clean title located in Orlando Fl. Recently did a full tune up on the car with all new parts
Dyno tuned by hp logic on Uprev made 300whp
Engine
Galley gaskets done
Injen long tube intakes
Eps pcv delete
Rev9 titanium y pipe 3/14
Isr exhaust 3/14
Sebring tuning Resonated test pipes
Z1 poly engine mounts
New valve cover and spark plugs 4/1
New ps pump with oem fluid 4/1
Full coolant change with new radiator 4/3
Transmission
Redline mt-85 fluid installed 3/19
Jwt clutch and light weight flywheel
Rjm clutch pedal assembly installed 3/14
Tilton clutch master with stainless steel
clutch line with Motul RBF-600 installed 3/14
Diff changed Titan 75w-90 3/24 installed
Suspension/brakes/wheels
Stance gr+ coilovers
Spl rear camber and traction arms
Z1 rear toe arms
Whiteline diff bushings with vlsd
Front and rear Brembo brakes with slotted rotors and stainless lines
Black tuner open end lug nuts
Enkei Raijin 18x8.5 with square set up rear 20mm spacers 255/35/18 federal 595 rs-rr brand new installed 3/18
Interior
Pioneer touch screen
Works bell short hub with nrg 2.5 quick release and sparco suede wheel
Dyno tuned by hp logic on Uprev made 300whp
Engine
Galley gaskets done
Injen long tube intakes
Eps pcv delete
Rev9 titanium y pipe 3/14
Isr exhaust 3/14
Sebring tuning Resonated test pipes
Z1 poly engine mounts
New valve cover and spark plugs 4/1
New ps pump with oem fluid 4/1
Full coolant change with new radiator 4/3
Transmission
Redline mt-85 fluid installed 3/19
Jwt clutch and light weight flywheel
Rjm clutch pedal assembly installed 3/14
Tilton clutch master with stainless steel
clutch line with Motul RBF-600 installed 3/14
Diff changed Titan 75w-90 3/24 installed
Suspension/brakes/wheels
Stance gr+ coilovers
Spl rear camber and traction arms
Z1 rear toe arms
Whiteline diff bushings with vlsd
Front and rear Brembo brakes with slotted rotors and stainless lines
Black tuner open end lug nuts
Enkei Raijin 18x8.5 with square set up rear 20mm spacers 255/35/18 federal 595 rs-rr brand new installed 3/18
Interior
Pioneer touch screen
Works bell short hub with nrg 2.5 quick release and sparco suede wheel
Trending Topics
I am interested. I need to see a lot of under car photos.
I can buy it, but I want to be assured there is no rust, anywhere.
I already have a '91 CRX SI with a K24 twin scroll turbo, 6 speed with limited slip diff, BIG Brakes, Welded In Roll Bar, New Wheel, Tires with 1000 miles on them. Currently installing 12 gallon auxilliary fuel tank. I want yours for a daily driver.
Thanks,
Lee
leeines@aol.com
Text 520 730 3402
I can buy it, but I want to be assured there is no rust, anywhere.
I already have a '91 CRX SI with a K24 twin scroll turbo, 6 speed with limited slip diff, BIG Brakes, Welded In Roll Bar, New Wheel, Tires with 1000 miles on them. Currently installing 12 gallon auxilliary fuel tank. I want yours for a daily driver.
Thanks,
Lee
leeines@aol.com
Text 520 730 3402
Thread
Thread Starter
Forum
Replies
Last Post
ccarey
Vehicles for sale
43
May 11, 2008 02:04 PM




