I replaced the passenger front and rear doors on my 92 Accord and while I was able to get the rear door lined up with the same gap as the other side (adjusting the hinge bolts and the striker), I cannot get the front door to line up at all. The bottom has a gap of almost half an inch and the top is overlapping the edge of the rear door. Even when I adjust the striker higher and try to rotate the door up and towards the front to straighten it out, I have a huge gap between the 2 doors. I don't know what I am doing wrong but damn it is frustrating. Anyone have any tips or tricks on how to get the door aligned? I am using my original hinges with good bushings.