Harness problem
Hey everyone i have a situation with my car. during the summer i was tboned and when replacing the door and fender the harness that came from the side of the car that connected to the door was cut. i have no idea what to do and im seeking some guidance. Do i replace the whole harness and if so can someone plz give me the part number, or do i find another pigtail connecter from the junk yard and try and reconnect the wires ? My car is a 2000 integra LS 5spd manual coupe model
Last edited by Noel Lumanglas; Jan 17, 2018 at 08:01 PM.
Honda-Tech Member
iTrader: (1)
Joined: Aug 2003
Posts: 7,616
Likes: 1
From: Left Coast : High Altitude, Top Floor
Either replace the harness under the dash or clip a replacement pigtail and solder the wires one by one. Soldering a replacement pigtail would be the quickest route but reliability of the fix would depend on your own abilities.
As far as part numbers go, you can reference one of the many oem parts sites. They usually have full diagrams and part #s to your heart's content. My go to is oemacuraparts.com but there's tons of those sites.
Thread
Thread Starter
Forum
Replies
Last Post
slowcoupe93
Honda Accord (1990 - 2002)
1
Jul 3, 2007 05:05 PM
Superhatch
Honda CRX / EF Civic (1988 - 1991)
4
Jul 10, 2002 04:37 AM



