K24a wiring help!!
Thread Starter
Honda-Tech Member
Joined: Jul 2017
Posts: 2
Likes: 0
K24a wiring help!!
I recently bought a K24a from a 2004 Honda odyssey which came with cvt tranny. Doing this swap in my DA5 integra. The engine came with uncut harness. I tried downloading the pinout from net but all the pinout seems from the tsx. I was all happy until i checked the engine harness to match with the pin-out! :-( it doesn't match at all !
The ecu part number is 37820-RFE-915
I need only the two dash/body wiring jack's pinout as the engine wiring is uncut.
And my question is are the all k24's body/under dash wiring jack pinout of the ecu same??
Thanks in advance :-)
The ecu part number is 37820-RFE-915
I need only the two dash/body wiring jack's pinout as the engine wiring is uncut.
And my question is are the all k24's body/under dash wiring jack pinout of the ecu same??
Thanks in advance :-)
Honda-Tech Member
Joined: Mar 2017
Posts: 8
Likes: 0
From: shelby ohio
Re: K24a wiring help!!
no its not the same your best bet is to go to your local junkyard and look for the full dash harness out of a rsx preferably non automatic and take the ecu and full dash/engine harness out and make sure you take the whole ignation cause the ecu needs to read the chip in the key and bcm as well
Thread
Thread Starter
Forum
Replies
Last Post
therotaryrocket
Honda CRX / EF Civic (1988 - 1991)
6
Jul 12, 2009 09:54 AM