I want to do a rear disk conversion on my dx. I was wondering if a 4 door da integra trailing arms will work or do I need the 2door

 

Have you checked the FAQ?

 

Yeah some what also got some information from a buddy. I can use either the da or dc trailing arms. Just have the ebrake I have to look up.

 

Just picked up some a rear disk conversion it has abs set up but the lines were cut. Is there any issue with that if not what else do i need other then 40/40 valve and 15/16 mc

 

Can i use my stock mc with the rear disk if I swap out the proportioning valve I have a dx sedan

 

You don't need the mc or porportioning valve at all, they are optional if I remember correctly.

Been looking at doing this to my sedan as well.

 

Picking up a valve Tuesday if all goes well. Get my brushing in this week and hopefully I can get my car done in one day

 

What brake lines do i use do i use the ef or da

 

What does the FAQ say?

 

When I did mine I did DA assemblies and park brake cables. Also did a 40/40 prop valve (member on here remans them but cant remember his name). I didnt awap the MC. I have heard it makes a huge difference just never did it. Used rear braided da lines too if I remember correctly. Nows the time to do the trailing arm bushings too if your gonna do them.

 

Doing my bushings just got them in its a pain to clean out all the rubber.