I literally just got this fuel pressure regulator top and bottom back from the anodizing shop today. The work was done by the same business that does coatings for Tial. Three months ago, I used what I thought was a safe degreaser in my engine bay and it ruined the finish on my fuel pressure regulator, blowoff valve, wastegate, fuel rail, and numerous small fittings. You can see the damage in the final picture below when the FPR used to be red. I sent all those parts in to be anodized, but in the mean time I had purchased another Aeromotive FPR. This particular FPR for sale has exactly 2,288 miles on it, and as you can see the diaphragm is in perfect shape. I think the FPR turned out beautiful, and the base looks better than when it was new. I actually prefer the silver cap to the red. It was hard to capture with the camera, but you can see the faint Aeromotive engraving in picture 8. I forgot to install the 1/8" NPT plug before I took these pictures. Please remind me if you decide to purchase this.

edit...Maybe I was asking too much? Price lowered to $100. Send me a PM if you're interested, thanks.

 

bump

 

Port Size?

 

All 3 are ORB-06. Specs are here:

https://www.aeromotiveinc.com/produc...***-regulator/

 

Considering this

 

Any Idea if there is no down side on using this for a -8 feed as when entering the FPR will be reduced to -6, compare to the Aromotive with the Orb 10 ports ?

Thanks

 

OK, let me know...

I have no clue, sorry. Call Aeromotive tech support and ask for Brett. You won't wait on hold for long. (913) 647-7300

 

bump

 

bump

 

bump