So my friend killed his accord engine, well the block, by running it with almost no oil. So I picked up a '96 Prelude for cheap with the H22, but it's a non vtec motor. I see posts all over the net about h22 heads on a f series block but how hard would it be to run the F23a1 head on the H22 block? It would certainly make the swap alot easier. Also from what I've read the 96 prelude is the one to get cause of not having the immobilizer. Can anyone recommend a good swap guide? I'm putting the non vtec h22 from the 96 prelude into a 99 automatic accord coupe. Both cars have auto trans. Would be f**king awesome if I could keep the f23 head