IN 93 Civic Si Boosted, Sleeved, Quafe, A/C & P/S
I have a 93 Honda Civic Si for sale. This is a very nice condition Si that has been well kept and runs and drives excellent. The engine was removed and sent to Inline Pro to be built and sleeved. The build has less than 20k miles on it, and runs flawlessly. The turbo kit is from Go-Autoworks and features the Turbonetics 60 turbo. I have the receipts for everything that has gone into this car. A lot of money was spent to get it to where it is now. The paint is in really good condition for its age, and the body only has minor dings on it. Interior is mint, I have replaced many things to try to get it showroom new. Sun roof needs assistance to open. I kept the A/C and P/S so it could be used as a nice daily. 188k on body. Only items it needs are the front speakers hooked back up. Clean title! Edit: The A/C worked a couple months ago, but it sat for two months and I moved it out of the garage yesterday and tested it out and it wouldn't get cold, guessing something simple
It has:
Engine:
Inline Pro Sleeved
75.5 mm Vitara Pistons
Eagle Rods
ACL Bearing Set
ARP Head Studs
Head gasket
Inline Pro fresh head
Koyo Radiater
Tial BOV and wastegate
EBC Solenoid
Grams 650CC Injectors
OE 4 Bar Map Sensor
CC Stage 4 Clutch
Go Autoworks D Street Kit w/ 3" downpipe
Tuned on Hondata s300
Exhaust:
Thermal R&D exhaust and hi flow cat
Brakes:
SS Brake lines-goodridge
Cross drilled slotted rotors- PSWD JDM
Hawk HPS pads
Wheels/Tires:
15x7 O.Z. Ultraleggera Gunmetal finish
205/50R-15 Tires
Lugs-Project Kicks R40 Gunmetal finish
Exterior:
JDM Front Lip- PSWD JDM SIR style
JDM Front Mud Flaps- JHP USA
Interior:
JDM Armrest
JDM Double din console
JDM Floormats
AEM oil, boost, AFR gauges
Suspension:
Front sway bar-Eibach 26mm
Rear subframe brace- ASR
Rear and front strut tower braces- PSWD JDM
Rear Lower control arms- PSWD JDM
Rear control arm bushings- Hardrace
Coilovers- AMR
Rear Camber arms, toe links, sway links- PSWD JDM
Front Camber Arms- Buddy Club
Transmission:
Fresh Syncrotech trans D16z6,
Carbon Synchronizers(Gear Speed), Quaife LSD,
Short shifter and ****- TMW
Axels- Gator carbon stage 2 axels
Car was tuned at Inline and put down 324hp at 20 psi. Boost is currently set to 18 psi. Motor can handle much more than this. I'm located in Evansville Indiana and am asking $6400 OBO for the car. I have included some of the receipts for the engine (over $12k spent)... done right.
Thanks.















More pics and more receipts on hand if needed. This is a really nice Si. Considering Si's in this condition are going for $3.5-4k on the forum this is a steal with the engine work and turbo kit on it.
Thanks
It has:
Engine:
Inline Pro Sleeved
75.5 mm Vitara Pistons
Eagle Rods
ACL Bearing Set
ARP Head Studs
Head gasket
Inline Pro fresh head
Koyo Radiater
Tial BOV and wastegate
EBC Solenoid
Grams 650CC Injectors
OE 4 Bar Map Sensor
CC Stage 4 Clutch
Go Autoworks D Street Kit w/ 3" downpipe
Tuned on Hondata s300
Exhaust:
Thermal R&D exhaust and hi flow cat
Brakes:
SS Brake lines-goodridge
Cross drilled slotted rotors- PSWD JDM
Hawk HPS pads
Wheels/Tires:
15x7 O.Z. Ultraleggera Gunmetal finish
205/50R-15 Tires
Lugs-Project Kicks R40 Gunmetal finish
Exterior:
JDM Front Lip- PSWD JDM SIR style
JDM Front Mud Flaps- JHP USA
Interior:
JDM Armrest
JDM Double din console
JDM Floormats
AEM oil, boost, AFR gauges
Suspension:
Front sway bar-Eibach 26mm
Rear subframe brace- ASR
Rear and front strut tower braces- PSWD JDM
Rear Lower control arms- PSWD JDM
Rear control arm bushings- Hardrace
Coilovers- AMR
Rear Camber arms, toe links, sway links- PSWD JDM
Front Camber Arms- Buddy Club
Transmission:
Fresh Syncrotech trans D16z6,
Carbon Synchronizers(Gear Speed), Quaife LSD,
Short shifter and ****- TMW
Axels- Gator carbon stage 2 axels
Car was tuned at Inline and put down 324hp at 20 psi. Boost is currently set to 18 psi. Motor can handle much more than this. I'm located in Evansville Indiana and am asking $6400 OBO for the car. I have included some of the receipts for the engine (over $12k spent)... done right.
Thanks.















More pics and more receipts on hand if needed. This is a really nice Si. Considering Si's in this condition are going for $3.5-4k on the forum this is a steal with the engine work and turbo kit on it.
Thanks
Last edited by Esser; Jun 15, 2016 at 04:16 PM.
About $8k for the engine work. About $5k for the turbo kit and supporting mods. I think I have pics of receipts if you want a breakdown of prices.
I hate when people comment on FS threads without wanting to buy what's for sale, but man, that's done RIGHT. Keeping the AC & PS and it's clean, VERY well done.
Trending Topics
New trans put in less than 6 months ago, even have the receipt for it. Buy with confidence!
Last edited by Esser; Jun 12, 2016 at 05:36 PM.







