So I've acquired an 85 crx without an engine or transmission, but I have my old b18b with an itr transmission I'd like to swap in. My problem now is getting integra hubs or knuckles.

My thought is this.
Gen1 integra hubs and bearings can be pressed into the crx knuckles (same bearings per NAPA)
Gen1 integra inner races are the same inner diameter as 92-95 civic wheel bearings.
92-95 Civic hubs are plentiful and can accept the proper axles for the swap along with having good availability.

Should there be any problem with pressing the civic hubs into integra bearings into the crx knuckles?

Thanks for the help!

 

gen 1 integra and the awd 3g civic wagon hubs use the standard axle spline for swaps.... same ef hubs..