Dimple Die with Honda bearing races
Thread Starter
Honda-Tech Member
Joined: Jan 2001
Posts: 2,273
Likes: 3
Dimple Die with Honda bearing races
dimple die from Honda wheel bearing races
Big race front acura integra , small race honda/acura rear disk hub.
Make plate/flange for smaller race that matches the diameter of the larger race so it will flatten out the sheet metal after forming the dimple. Used a 2.5" washer and cut out the center with 1-3/4" hole saw and it fit perfect over the smaller race.
video
Big race front acura integra , small race honda/acura rear disk hub.
Make plate/flange for smaller race that matches the diameter of the larger race so it will flatten out the sheet metal after forming the dimple. Used a 2.5" washer and cut out the center with 1-3/4" hole saw and it fit perfect over the smaller race.
video
Thread
Thread Starter
Forum
Replies
Last Post
civicrr
Road Racing / Autocross & Time Attack
41
Jul 31, 2005 11:12 PM
Econo'Box
Road Racing / Autocross & Time Attack
2
Apr 4, 2005 10:00 AM