Hi guys I guess I'm back in the Honda game lol. Any who I recently picked up an 89 Crx shell from a friend of mine. But the rack and pinion is bad on it. I was wondering if its possible to convert it to a PS rack and pinion? And if so how do I go about it? I have done a non PS rack to a power PS before on a 93 del sol i had, but thats cause they made del sol''s with PS. And if you ask why convert to PS. Its cause I have cerebal palsy and it would just be easier on me, don't get me wrong the 1st car I taught myself to drive stick on was a non PS 5spd EK lol. So if I can get PS I rather have it, but if not I can deal with it. Thanks for the input guys.

 

Adding power steering to a CRX | HondaSwap
"use a rack from 90-93 integra. and power steering accessories such as pump and hoses from a 92-95 del sol with a d series motor... thats if your running a d ....if running a b hook up the 90-93 teg stuff."


https://honda-tech.com/honda-crx-ef-...rx-si-3037441/
Rack and pinion from a 88-91 civic. While your at it, I would also change out tie rod (depending on condition), alignment will be needed afterwards.


Good info here too: 91 CRX Si power steering conversion. Pulley problem. - HondaCivicForum.com


Of course these are somewhat conflicting but worth a read.

 

Thank you very much. Very helpful, lol now I just need to get it done.