MD 2000 white Civic turbo coupe. GT35R sleeved
Thread Starter
Honda-Tech Member
Joined: Nov 2015
Posts: 2
Likes: 0
2000 white Civic turbo coupe. GT35R sleeved
Hello everyone. Joined here to try and sell my car.
Bought this car from a forum member here about 2 years ago. Believe his username is "bmxkills".
Had fun with the car in the summer. The b16 that was formerly in it startedknocking. So I put in a 85mm sleeved gsr block to replace the 1.6liter bottomend. Added DSS 2.8 axles, tein basis coilovers. And a few other odds and ends. Basicallytook an almost finished car and perfected it.
2000 Civic EX
VIN - 1HGEJ8144YL037096
15x,xxx miles on chassis
less than 3k on the new short block
Clean title
Car was originally Taffeta White, recent respray of same color (no orange peel,fish eyes, runs/drips, etc, very high quality!)
Body is straight and clean
No rust
Partially rolled fenders
Si Wing
Painted moldings and side skirts
Black "H" emblems
XXr wheels with kumho tires
Battery relocation to trunk With aNew Odyssey AGM battery
HAsport motor and tranny mounts
B16 head Stage 3 done by Slowmotion, receipts for $2200 on back of dyno sheet(4 Angle valve job, port and polish, fresh seals, guides, etc)
OEM Honda Head Gasket (just put on)
Supertech .5 oversized valves
Supertech Springs and Ti retainers
1000cc injectors
Walbro 255 fuel pump
AEM fuel filter
AEM fuel pressure regulator
AEM fuel rail
Skunk2 port-matched intake manifold
Edelbrock throttle body
MSD plug wires
GSR cams
Blox cam cap
GSR Block with 85MM darton sleeve. Forged eagle rods and JP pistons
ARP bolts and head studs
Garrett GT35R Turbo liquid and oil cooled
Peakboost top mount exhaust manifold - kit alone http://turbostore.com/pebtokit.html -$3000+$250+$225+$350
3" downpipe
3" Thermal exhaust (sounds super quiet, I love it)
Tial 44mm wastegate with dump tube at wg
Tial 50mm blow off valve
Full Race intercooler
Piping done by Slowmotion
Slowmotion Couplers
Vibrant oil cooler
Mishimoto radiator
Bunged VC with a Bloack works catch can
AEM boost control solenoid
Tuned by John at Absolute-proformance in Finksbrg MD on 15psi just breaking thenew motor in I put down 450whp
Launch control at 5k rpm
AEM Tru Boost gauge
AEM Wideband
Auto Meter oil pressure gauge
JDM GSR tranny
Energy Suspension shifter bushings
Skunk2 dual bend shifter
DSS 2,8 axles
Tein Basis coilovers less than 3k miles
Suspension Techniques 3/4" swaybars
Blox rear lower control arms
Skunk2 upper control arms
Big brake kit, slotted and drilled rotors
JVC double din head unit
Sure there is some I have missed inthe description. Car is as clean as a 16 year old car can be without being adesignated show car.
Please contact me @ 443-nine74-3324my name is Nick. I Prefer TXt but leave me a voicemail and I will get back toyou.
Asking 8100$ OBO
Price drop to 7500$
Bought this car from a forum member here about 2 years ago. Believe his username is "bmxkills".
Had fun with the car in the summer. The b16 that was formerly in it startedknocking. So I put in a 85mm sleeved gsr block to replace the 1.6liter bottomend. Added DSS 2.8 axles, tein basis coilovers. And a few other odds and ends. Basicallytook an almost finished car and perfected it.
2000 Civic EX
VIN - 1HGEJ8144YL037096
15x,xxx miles on chassis
less than 3k on the new short block
Clean title
Car was originally Taffeta White, recent respray of same color (no orange peel,fish eyes, runs/drips, etc, very high quality!)
Body is straight and clean
No rust
Partially rolled fenders
Si Wing
Painted moldings and side skirts
Black "H" emblems
XXr wheels with kumho tires
Battery relocation to trunk With aNew Odyssey AGM battery
HAsport motor and tranny mounts
B16 head Stage 3 done by Slowmotion, receipts for $2200 on back of dyno sheet(4 Angle valve job, port and polish, fresh seals, guides, etc)
OEM Honda Head Gasket (just put on)
Supertech .5 oversized valves
Supertech Springs and Ti retainers
1000cc injectors
Walbro 255 fuel pump
AEM fuel filter
AEM fuel pressure regulator
AEM fuel rail
Skunk2 port-matched intake manifold
Edelbrock throttle body
MSD plug wires
GSR cams
Blox cam cap
GSR Block with 85MM darton sleeve. Forged eagle rods and JP pistons
ARP bolts and head studs
Garrett GT35R Turbo liquid and oil cooled
Peakboost top mount exhaust manifold - kit alone http://turbostore.com/pebtokit.html -$3000+$250+$225+$350
3" downpipe
3" Thermal exhaust (sounds super quiet, I love it)
Tial 44mm wastegate with dump tube at wg
Tial 50mm blow off valve
Full Race intercooler
Piping done by Slowmotion
Slowmotion Couplers
Vibrant oil cooler
Mishimoto radiator
Bunged VC with a Bloack works catch can
AEM boost control solenoid
Tuned by John at Absolute-proformance in Finksbrg MD on 15psi just breaking thenew motor in I put down 450whp
Launch control at 5k rpm
AEM Tru Boost gauge
AEM Wideband
Auto Meter oil pressure gauge
JDM GSR tranny
Energy Suspension shifter bushings
Skunk2 dual bend shifter
DSS 2,8 axles
Tein Basis coilovers less than 3k miles
Suspension Techniques 3/4" swaybars
Blox rear lower control arms
Skunk2 upper control arms
Big brake kit, slotted and drilled rotors
JVC double din head unit
Sure there is some I have missed inthe description. Car is as clean as a 16 year old car can be without being adesignated show car.
Please contact me @ 443-nine74-3324my name is Nick. I Prefer TXt but leave me a voicemail and I will get back toyou.
Asking 8100$ OBO
Price drop to 7500$
Last edited by Taffetaturbo; Feb 20, 2016 at 03:04 PM.
Thread Starter
Honda-Tech Member
Joined: Nov 2015
Posts: 2
Likes: 0
Re: 2000 white Civic turbo coupe. GT35R sleeved
Sorry had difficulty finding pictures small enough to post.
I attached one with my username in it also.
I attached one with my username in it also.
Last edited by toyomatt84; Jan 21, 2016 at 03:18 PM. Reason: This isn't Craigslist.
Honda-Tech Member
Joined: Mar 2014
Posts: 178
Likes: 0
From: Fairfax, VA
Re: 2000 white Civic turbo coupe. GT35R sleeved
This ad says 9500 obo but the craiglist one says 8800 obo. Just a heads up. Also bump for a DMV local!
Last edited by JoshTheJerk; Dec 21, 2015 at 01:08 PM. Reason: a word
Trending Topics
Thread Starter
Honda-Tech Member
Joined: Nov 2015
Posts: 2
Likes: 0
Re: 2000 white Civic turbo coupe. GT35R sleeved
Bump thread.
I've had 3 people "on there way cash in hand'. That just don't show up....smh.
Hopefully once income taxes start rolling in I can get a sale. Selling to fund my rx7 build.
I have no doubt once a legit buyer comes. And sees the quality of the build. And how well I take care of the car it will sell....until then
I've had 3 people "on there way cash in hand'. That just don't show up....smh.
Hopefully once income taxes start rolling in I can get a sale. Selling to fund my rx7 build.
I have no doubt once a legit buyer comes. And sees the quality of the build. And how well I take care of the car it will sell....until then
Honda-Tech Member
Joined: Apr 2002
Posts: 1,201
Likes: 0
From: PA
Thread
Thread Starter
Forum
Replies
Last Post
horsekiller
Southern California (Sales)
4
May 5, 2010 01:27 PM
BB6Luder
Southeast (Sales)
5
Jan 20, 2006 10:56 AM
Rzoops
Vehicles for sale
6
Aug 27, 2005 07:17 AM
illicon2003
Vehicles for sale
4
Feb 10, 2004 07:47 PM