ITR LSD
Thread Starter
Honda-Tech Member
Joined: Feb 2008
Posts: 117
Likes: 0
From: USA
ITR LSD
I have an Integra Type R Limited Slip Differential for sale. I have put less than 20K on this diff and it has less than 2K on the diff bearings (purchased new). It has the updated ball bearings. Axle splines are perfect. Diff bolts are all in good condition (purchased new), not stripped, they just need the loctite cleaned off. Reason for selling is that I am upgrading. It will include the LSD, ball bearings installed, speedometer gear pressed onto LSD, and the diff bolts.
Asking $350
Pic with card, same towel, same floor, same LSD.
Asking $350
Pic with card, same towel, same floor, same LSD.
Last edited by cheapskate; Nov 15, 2015 at 02:29 PM.
Trending Topics
Honda-Tech Member
Joined: Apr 2015
Posts: 48
Likes: 0
Re: ITR LSD
Just trying to help you out here the same as ShinsenTuner did above.
Look at the sticky at the top of the forum, and all the other for sale posts.
Need to take those pictures again with a piece of paper showing: Your Username and the date
This is only to protect yourself and help prevent scammers from ripping people off. Small step to show that you have the item and not just an image taken off the net.
All the best selling your item, try and make the mods life easy. Assuming most of them are volunteers and your using this for free.
Look at the sticky at the top of the forum, and all the other for sale posts.
Need to take those pictures again with a piece of paper showing: Your Username and the date
This is only to protect yourself and help prevent scammers from ripping people off. Small step to show that you have the item and not just an image taken off the net.
All the best selling your item, try and make the mods life easy. Assuming most of them are volunteers and your using this for free.
Thread Starter
Honda-Tech Member
Joined: Feb 2008
Posts: 117
Likes: 0
From: USA
Re: ITR LSD
Been taking so much heat on the pics!!
This is for the LSD, Bearings, and Bolts. I have a GSR 4.4 FD (ring gear and counter shaft) that I could include at an additional cost.
We can talk about it if you are interested.
Thanks.
This is for the LSD, Bearings, and Bolts. I have a GSR 4.4 FD (ring gear and counter shaft) that I could include at an additional cost.
We can talk about it if you are interested.
Thanks.
Thread
Thread Starter
Forum
Replies
Last Post