My 1992 hatchback dx did not come with power doors. I recently picked up on two complete power doors and the connecter that goes into the interior. Power mirror switch and pigtail and the fuse box connecter. Starting to make my wire harness I noticed the colors are different than the wiring diagrams I see online. I need help which wire goes to which. I also need help as can I use my original door handles or just the lock tumbler?

Driver door wire colors
White/yellow , blue/black, white/green, blue/yellow, green/red, blue/green,
Green/white, black, grey/black, blue/green, yellow/red, white/red, blue/white
Blue/black, yellow/white

Passenger door wire colors
Blue/black, yellow/red, blue/yellow, yellow/red, yellow/white, red/green, white/red, yellow/black, brown/black, blue/green

 

Power lock:
Ld-rd: white/red,yellow/red
Ld-fb: white/green
Power mirror:
Ld-switch: blue/green, blue/black
Rd-switch: yellow/black, yellow/red
Ld-switch-rd: yellow/white
Power window:
Ld-fb: white/yellow,
Ld-rd: blue/yellow, blue/green
Ld-fb-rd: blue/black
Speaker:
Ld: gray/black blue/white
Rd: red/green, brown/black

Would this be it? I think I just answered my question. I just have two wires left on drivers door that are green/white, green/red

 

Those two wires go to the power locks to allow for a connection within the cabin, such as for an alarm.

 

Can I leave those cables disconnected and expect everything to function properly?

 

Yes, you can leave those wires alone. The Grn/Wht and Grn/Red wires are for the security system door lock/unlock input, if the car doesn't have a security system, the connector for those wires is left unplugged.

 

Thanks are Exterior power door handles universal with non power and vice vers

 

Yes.