how can I fit 13" circle track racing wheels on to 94 si
I race 3/8 and 4/10ths dirt tracks that allowes us to use racing tires. I have loads of 23x8x13" hoosiers and american racers. I am trying to figure out if I can use a different calliper and rotor set up on my 94 si chassis that will allow the fitment of my 13" wheels. I know this is an unorthodox question since usually everyone wants to upgrade to these calipers and rotors that is on my car now. Any help is apreciated. Thank you.
Not without changing the hubs. The caliper mounts are high up on both ends of the caliper.. finding a smaller caliper alone won't fit. Not to mention the rotors are already at 11something inches.
edit: here you go. Integra guys would know, however, you'd need Teggy full knuckle arm spindles. no clue if they'd fit, my guess is not.
https://honda-tech.com/acura-integra...5-teg-1802173/
edit: here you go. Integra guys would know, however, you'd need Teggy full knuckle arm spindles. no clue if they'd fit, my guess is not.
https://honda-tech.com/acura-integra...5-teg-1802173/
I think I've read before that you can if you have S model calipers (I don't know if they are different from the other models) and/or you run a 2" backspace. A 23" tall tire on a 3/8 track would be screaming. You might want to look into a 14" or 15" wheel.
Thread
Thread Starter
Forum
Replies
Last Post
Pr0ject93hb
Honda Civic / Del Sol (1992 - 2000)
9
Jan 21, 2007 12:49 PM
BB6-213
Honda Prelude
12
May 21, 2006 09:11 AM



