PR3 head fully worked Ferrea comp plus everything brand new must see!!
Thread Starter
Honda-Tech Member
iTrader: (13)
Joined: May 2012
Posts: 994
Likes: 0
From: Paratrooper HQ
PR3 head fully worked Ferrea comp plus everything brand new must see!!
More goodies from my part out.
This head was built for my FIS Integra and is a perfect head for turbo cars, we went with the comp plus valves to hold up in a high heat turbo environment.
this head has been completely reconditioned and looks BRAND NEW!!
Head was from a 1999 Civic Si bone stock 70K miles.
never resurfaced before this.
CAMS CAPS AND RAILS ARE INCLUDED WITH HARDWARE
CAMS AND VTEC solenoid ARE NOT
questions and offers (cash/paypal only no trades)
gearhead5150@yahoo.com 2053827847
I work 5-5 so please text before you call
$1600 plus shipping paypal (I know this seems like a lot but just asking for what I have into it parts and labor) plus you don't have to wait for the machine shop or parts
the good stuff:
PR3-2 head from 99 civic Si
GSC power division Viton valve stem seals
GSC power division dual valve springs with Titanium retainers
Combustion chamber custom port
head reconditioned (hot tank, refinish, clean inspected)
5 angle competition valve job
resurfaced with mirror finish
valve seats,
intake/exhaust runners ported
ITR LMA's
Ferrea comp plus intake/exhaust valves +.5mm
This head was built for my FIS Integra and is a perfect head for turbo cars, we went with the comp plus valves to hold up in a high heat turbo environment.
this head has been completely reconditioned and looks BRAND NEW!!
Head was from a 1999 Civic Si bone stock 70K miles.
never resurfaced before this.
CAMS CAPS AND RAILS ARE INCLUDED WITH HARDWARE
CAMS AND VTEC solenoid ARE NOT
questions and offers (cash/paypal only no trades)
gearhead5150@yahoo.com 2053827847
I work 5-5 so please text before you call
$1600 plus shipping paypal (I know this seems like a lot but just asking for what I have into it parts and labor) plus you don't have to wait for the machine shop or parts
the good stuff:
PR3-2 head from 99 civic Si
GSC power division Viton valve stem seals
GSC power division dual valve springs with Titanium retainers
Combustion chamber custom port
head reconditioned (hot tank, refinish, clean inspected)
5 angle competition valve job
resurfaced with mirror finish
valve seats,
intake/exhaust runners ported
ITR LMA's
Ferrea comp plus intake/exhaust valves +.5mm
Last edited by $MIKE$; Feb 23, 2015 at 02:00 PM.
Thread
Thread Starter
Forum
Replies
Last Post
$MIKE$
Classifieds: Forced Induction
3
Feb 27, 2015 03:00 PM