Ballistic1350's part out STC Reaper, Hondata, Skunk2, Koyo, Nardi, Nrg, Tial
Parting out my 92 eg hatch
All items are obo, prices include shipping to the contenental US.
Pm for paypal info
Ball bearing STC Reaper
T3 .63 AR hot side, high temp coating
Includes water fittings, lines, and oil feed orifice. Used for less than 500 miles. No shaft play
$1600
Skunk 2 composite fuel rail comes with orb to an adapters (not originally included when bought new) for both ends and install hardware. Both adapters are around 30 new, so $160 shipped for it
Skunk2 74 mm throttle body pro billet version for d/b/f/h series motors. Comes with mounting bolts, gasket, and throttle position sensor already setup. Asking $180 shipped
ARP headstuds used on my lsvtec. Torqued 2 times. Asking $75 shipped SOLD
b18b obd1 distributor with new cap and rotor. comes with NGK blue plug wires. Asking $80 shipped
Hasport motor mounts for B series in eg civic, come with u70a poly bushings. I have both 2 bolt and 3 bolt mounts. I made a mistake ordering originally. Asking $250 shipped SOLD
Oem vtec distributor modded for cpr $60... and if you need it as a complete distributor I can grab the stuff that was removed SOLD
Also have a distributor king (new manufacture not remanufactured) dizzy which was modified for cps as well. Also asking 60 SOLD
Koyo radiator with spal fan with Koyo rad cap $300
T1racedevelopment catch can with lines and b series block fittings $300
Autometer electric oil pressure & water temp gauges comes with all wiring and sensors $230 SOLD
B series obd1 alternator with bracket
Tial Q bov (silver) $200
Mac 3 port solenoid comes with L bracket to mount near motor mount and full Push to connect vacuum line kit (far right of pic) $45
Nardi deep corn steering wheel $230 SOLD
If anyone is local to the dmv specifically Montgomery Village MD and wants to pickup pm for pricing.
Stuff thats sold already:
Ported GSR head SOLD
B series axles SOLD
LS trans SOLD
Avid torque mounts, includes factory torque mount brackets $110 shipped SOLD
Nrg short hub (black) $70 SOLD
Nrg quick release (black) $70 SOLD
Dei titanium turbo blanket for T3 turbo SOLD
B series starter SOLD
Skunk2 oil cap $25 SOLD
Aem cam gears (black) $150 SOLD
S2000 coils with adapter plate $125 SOLD
Hondata cpr $325 SOLD
Skunk 2 ultra street intake manifold.$300 SOLD
Chase bays CM1 Tuck harness obd1 for eg civic or integra $375 shipped SOLD
Hondata s300v2 with bbg in brand new p28 ecu I got from xenocron $525 SOLD
Vented b18c valve cover needs a new coat of paint $75 SOLD
Tial 44mm waste gate (black) comes with all springs $275 SOLD
Go auto works T3 ram horn manifold. Manifold is high temp coated and wrapped with dei titanium. Downpipe and dump tube also wrapped. Downpipe has slight damage to flex joint, superficial only. Has bung for wideband too.
$625 shipped SOLD
Intercooler with 3" piping and relocated iat bung (will not part piping from Intercooler ) SOLD
Check me out on nasioc under the same screen name for more feedback. Buy with confidence!!!
All items are obo, prices include shipping to the contenental US.
Pm for paypal info
Ball bearing STC Reaper
T3 .63 AR hot side, high temp coating
Includes water fittings, lines, and oil feed orifice. Used for less than 500 miles. No shaft play
$1600
Skunk 2 composite fuel rail comes with orb to an adapters (not originally included when bought new) for both ends and install hardware. Both adapters are around 30 new, so $160 shipped for it
Skunk2 74 mm throttle body pro billet version for d/b/f/h series motors. Comes with mounting bolts, gasket, and throttle position sensor already setup. Asking $180 shipped
ARP headstuds used on my lsvtec. Torqued 2 times. Asking $75 shipped SOLD
b18b obd1 distributor with new cap and rotor. comes with NGK blue plug wires. Asking $80 shipped
Hasport motor mounts for B series in eg civic, come with u70a poly bushings. I have both 2 bolt and 3 bolt mounts. I made a mistake ordering originally. Asking $250 shipped SOLD
Oem vtec distributor modded for cpr $60... and if you need it as a complete distributor I can grab the stuff that was removed SOLD
Also have a distributor king (new manufacture not remanufactured) dizzy which was modified for cps as well. Also asking 60 SOLD
Koyo radiator with spal fan with Koyo rad cap $300
T1racedevelopment catch can with lines and b series block fittings $300
Autometer electric oil pressure & water temp gauges comes with all wiring and sensors $230 SOLD
B series obd1 alternator with bracket
Tial Q bov (silver) $200
Mac 3 port solenoid comes with L bracket to mount near motor mount and full Push to connect vacuum line kit (far right of pic) $45
Nardi deep corn steering wheel $230 SOLD
If anyone is local to the dmv specifically Montgomery Village MD and wants to pickup pm for pricing.
Stuff thats sold already:
Ported GSR head SOLD
B series axles SOLD
LS trans SOLD
Avid torque mounts, includes factory torque mount brackets $110 shipped SOLD
Nrg short hub (black) $70 SOLD
Nrg quick release (black) $70 SOLD
Dei titanium turbo blanket for T3 turbo SOLD
B series starter SOLD
Skunk2 oil cap $25 SOLD
Aem cam gears (black) $150 SOLD
S2000 coils with adapter plate $125 SOLD
Hondata cpr $325 SOLD
Skunk 2 ultra street intake manifold.$300 SOLD
Chase bays CM1 Tuck harness obd1 for eg civic or integra $375 shipped SOLD
Hondata s300v2 with bbg in brand new p28 ecu I got from xenocron $525 SOLD
Vented b18c valve cover needs a new coat of paint $75 SOLD
Tial 44mm waste gate (black) comes with all springs $275 SOLD
Go auto works T3 ram horn manifold. Manifold is high temp coated and wrapped with dei titanium. Downpipe and dump tube also wrapped. Downpipe has slight damage to flex joint, superficial only. Has bung for wideband too.
$625 shipped SOLD
Intercooler with 3" piping and relocated iat bung (will not part piping from Intercooler ) SOLD
Check me out on nasioc under the same screen name for more feedback. Buy with confidence!!!
Last edited by ballistic1350; Mar 26, 2015 at 03:39 AM.
Trending Topics
Re: Ballistic1350's part out STC Reaper, Hondata, Skunk2, Koyo, Nardi, Nrg, Tial
Ibump for a good seller parting out a great set of parts.
I fully endorse the Reaper ball bearing turbo that he is selling. (Although it would do wonders for a Subaru add part of a rotated setup)
I fully endorse the Reaper ball bearing turbo that he is selling. (Although it would do wonders for a Subaru add part of a rotated setup)
Re: Ballistic1350's part out STC Reaper, Hondata, Skunk2, Koyo, Nardi, Nrg, Tial
Got bored of Honda turbo cars eh?
Everything also shipped out to those who bought things yesterday
Re: Ballistic1350's part out STC Reaper, Hondata, Skunk2, Koyo, Nardi, Nrg, Tial
FWD is only rough for those that can't control it.. I think you gave up a little too early. But the S2K will be fine with a Reaper. You'd never be able to get one new again for your original price.
