I'm selling a set of slightly used DDtech stage 2 cams.
These were installed for dialling, 20km's on road and a short dyno session, so pretty much new.

Should suit a good b18c or b20

Note - I had issues with the exhaust cam - DDtech has kindly offered to look at/fix any issue with the cam should you have similar problems.
I would have done this but am literally 1/2 a world away in Australia.

Price is $500 USD shipped








PM me if you have any queries or wish to buy.

Specs as follows:

DDTECH STAGE 2 – STREET/STRIP RACING CAMS, HIGH COMP/PORTING REQUIRED
Duration: 298° INT / 290° EXH | Duration @ .050” lift (checked at valve): 264° INT / 256° EXH
Cam Lift: .318” INT / .306” EXH |Gross* Valve Lift: .492” INT / .474” EXH
Primaries/Secondaries: 260° duration / 220° @ .050” / .241” cam lift / .362” gross* valve lift
*Gross lift figures are calculated WITHOUT valve lash.
Degreeing Information
**For degreeing purposes only – Please contact us for application specific centerline recommendations**
104° LSA – 100° ICL / 108° ECL | Valve Lash: .007” INT / .008” EXH | 1.55 VTEC rocker ratio
INTAKE OPENS 32° BTDC | INTAKE CLOSES 52° ABDC
EXHAUST OPENS 56° BBDC | EXHAUST CLOSES 20° ATDC

 

good price for DDTECH cams, i know Derek and his cams, he more than willing to work with anyone that has his cams.

 

Anyone who buys these, contact me if you feel the need. Contact info is via DDTECHCAMS.com, Bump for op.

 

Bump, be good to get these back on their way to the states before xmas

 

bump, had some interest, first in best dressed!

 

DDtech ftw

 

bump

 

Sold