Hello All,

Just wanna say first that this forum has helped me with every one of my honda problems that I have ever had but I have a big one now. I have a 1997 Honda Accord and I swapped a JDM from a 1997 into my car. I had to use the JDM distributor and used a youtube video for the wiring. Here is the link: . I wired it up like this and it worked but I always had an engine light. It was a misfire code and misfire across all cylinders but it ran ok. I replaced the ignition control module earlier this year because the rpms were bouncing all over the place and that fixed that problem. Well the car was losing power so I decided to replace the injectors and noticed that I had 2 wires not connected from the distributor, which were for the cylinder position sensor. I connected them together and the misfire codes are gone but a p1381 comes up the the car runs terrible. I dunno what to do now. I'm stumped. Can someone please help. Thanks in advance.