Just put a b16a2 into my 96 ek coupe 5 speed.I used the same harness,the engine starts but lopes in idle at around 1500rpm.
AND will not rev at all ,only idles!
Now my question is HOW do I get it to run good cuz it was my dd.Has obd1 chipped p28 ecu with obd2a-obd1 step/jumper harness.I NEED HELP ON THE IACV 3 plug to 2 plug conversion!also need help with vtec wiring,and everything else WIRING WISE FOR THIS SWAP.please help,again car runs but will not rev,
Running obd2 distributor,