Intake nut/bolts rusted and won't undo!
Thread Starter
Honda-Tech Member
Joined: Jun 2014
Posts: 85
Likes: 0
Intake nut/bolts rusted and won't undo!
What can I do to get this intake cover (the black box) to come off?? I am trying to check the filter lol. It's a 97 Accord LX. Half the 'snorkel' of the intake that goes into the fender is missing and the intake box itself is cracked and broken. I am about to just order an ebay intake to get rid of this crap
Honda-Tech Member
Joined: Aug 2011
Posts: 2,632
Likes: 5
Re: Intake nut/bolts rusted and won't undo!
Pull the whole box?
If memory is correct, the lower part of the air cleaner (remove the mounting bolts) just press fits to the resonator assy.
On a 95 I had several of the bolts were rusted out. I just used a zip tie to hold the top to the bottom. Yea, every what 30K miles I would have to cut the zip ties off, change the filter and then new ties.
If memory is correct, the lower part of the air cleaner (remove the mounting bolts) just press fits to the resonator assy.
On a 95 I had several of the bolts were rusted out. I just used a zip tie to hold the top to the bottom. Yea, every what 30K miles I would have to cut the zip ties off, change the filter and then new ties.
Thread
Thread Starter
Forum
Replies
Last Post