I have a b20b with a b18a1 head obdo I'm burning a lot of oil the pvc valve on the b18a1 intake isn't connected to anything it has the hose from the intake to the pvc valve under the fuel rail but not connected to any thing what's the best solution to fix this . Would this cause me to burn a lot of oil . All suggestions would be greatly appreciated.

 

I think your problem is elsewhere in your build. My b20v only vents from the valve cover (no pcv setup) and it's never burned oil.

 

Is the PVC plugged?

 

Pcv valve is good theirs nothing connected to the end of the pcv valve under intake. I'm needing help on ventilation in the crank case . What would be the best and least expensive way to vent the crank case?

 

Do you have the black box on the passenger side, under the intake, of the block? That needs to be vented.