I'm doing a power window conversion on my 99 civic hatch. I bout brand new power window regulator and bought an 99 si complete floor and door harness. I already have power locks from my alarm system. All the wire is ran but when i plugged everything up, nothing happens. I got all the fuses plugged in as well as the power window regulator relay. I used my multimeter to test for power and the harness that plugs to the control switch on the driver side has power. However, the harness that plugs into the window regulator does not. There are 4 wires: red with yellow stripe, red with blue stripe, blue, and black. I have no idea where those wires run to inside the cabin. Any help out there will be greatly appreciated.

 

Bump.