Got a 1993 honda prelude SR-V. Blew the original H22A1 last year, so I bought another H22 from JDM Calgary. Came with 85,000kms, good compression and from what I was told will bolt directly in once I pull the old motor. I'm pretty mechanically inclined and do majority of my own work, but I've ran into a problem working alone while removing the old motor. I don't know where to go next. Here's what I for sure know I have done so far

Removed battery and box. Removed air box and intake but not manifold. Drained all fluids. Removed fans. Removed radiator. Removed wiring harness from right side of engine. Removed throttle cable. Removed some random wires that are headed into the firewall but attached to the engine. Don't know what they are exactly.

Where do I go next? I know at some point I have to take the wheels off and exhaust and also remove the driveshaft. But I don't know what else to take off. Any help would be greatly appreciated. Pics as well if possible. Thanks guys!!!!!