USDM OBD2 B18c1 INTERNAL part out, Tial, Neptune, PIC, OEM GSR etc!!
Thread Starter
Honda-Tech Member
Joined: Oct 2004
Posts: 1,435
Likes: 0
From: NYOB, where is mah gun, USA
USDM OBD2 B18c1 INTERNAL part out, Tial, Neptune, PIC, OEM GSR etc!!
hello everyone im parting out some internals from a USDM B18C1 engine that i had.
motor had 80K miles at the time of dis-assembly.
part are located in Albuquerque nm, and i can ship!
best method to contact me is via e mail oioishak AT gmail DOT com (fastest response)
and ALL PRICES ARE OBO, need to clear some stuff out! let me know!
OBD 2 gsr oil pump (80K miles, still works great!)
40 + S & H
P72 Pistons & Rods (pistons are still on rods, no skirt damage what so ever, tops have slight carbon build up, would recommend some ARP hardware for the rod end caps)
125 + S & H
P72 crankshaft (minty, no score marks etc, engine was religiously changed on this engine)
150 + S & H
P72 intake and exhaust valves (both sets are in great shape and sealed 100% when machine shop tested them)
45 + S & H
P72 valve train (springs, retainers & Keepers; all in excellent condition no issues or broken parts)
50 + S & H
Tial waste gate "fire ring" extra one from a 40? mm wastegate
35 + S & H
OEM GSR intake manifold (stripped of sensors)
20 + S & H
OEM fuel rails (one comes with a OEM regulator)
10 + S & H ADD 5$ for the regulator if you want it
motor had 80K miles at the time of dis-assembly.
part are located in Albuquerque nm, and i can ship!
best method to contact me is via e mail oioishak AT gmail DOT com (fastest response)
and ALL PRICES ARE OBO, need to clear some stuff out! let me know!
OBD 2 gsr oil pump (80K miles, still works great!)
40 + S & H
P72 Pistons & Rods (pistons are still on rods, no skirt damage what so ever, tops have slight carbon build up, would recommend some ARP hardware for the rod end caps)
125 + S & H
P72 crankshaft (minty, no score marks etc, engine was religiously changed on this engine)
150 + S & H
P72 intake and exhaust valves (both sets are in great shape and sealed 100% when machine shop tested them)
45 + S & H
P72 valve train (springs, retainers & Keepers; all in excellent condition no issues or broken parts)
50 + S & H
Tial waste gate "fire ring" extra one from a 40? mm wastegate
35 + S & H
OEM GSR intake manifold (stripped of sensors)
20 + S & H
OEM fuel rails (one comes with a OEM regulator)
10 + S & H ADD 5$ for the regulator if you want it
Last edited by omiehomie; Mar 15, 2014 at 04:10 PM.
Trending Topics
Thread
Thread Starter
Forum
Replies
Last Post
omiehomie
For Sale
11
Apr 24, 2014 08:27 PM