JE 9:1 Forged pistons on Eagle H-Beam forged rods - Honda B16A - $400
OK so these are some bad *** pistons mounted on stout connecting rods. Located in San Diego.
$400 OR BEST OFFER
Complete set of four (4) JE Forged pistons (Part Number 302498) Standard/Stock 81mm bore, dished 1.4cc, accept turbo or nitrous.
Used JE 9:1 Forged Pistons connected to Eagle H-Beam forged connecting rods (Part Number 356-CRS5290H3D) via NEW JE piston pins (Part Number 827-2250-15-51C) and JE retaining clips (Part Number 827-063-MW)
Connecting rod bolts are ARP.
These are used but in good condition. Have been cleaned and inspected and are ready to install.
Honda B16A(x) engines only, due to rod length.
Will handle PLENTY of cylinder pressure!
$400 OR BEST OFFER
INCLUDES NEW JE piston ring set (Part Number JG1004-3189)
TEXT IS BEST
760 six two two 7408
Thanks!
http://sandiego.craigslist.org/csd/pts/4335326997.html
$400 OR BEST OFFER
Complete set of four (4) JE Forged pistons (Part Number 302498) Standard/Stock 81mm bore, dished 1.4cc, accept turbo or nitrous.
Used JE 9:1 Forged Pistons connected to Eagle H-Beam forged connecting rods (Part Number 356-CRS5290H3D) via NEW JE piston pins (Part Number 827-2250-15-51C) and JE retaining clips (Part Number 827-063-MW)
Connecting rod bolts are ARP.
These are used but in good condition. Have been cleaned and inspected and are ready to install.
Honda B16A(x) engines only, due to rod length.
Will handle PLENTY of cylinder pressure!
$400 OR BEST OFFER
INCLUDES NEW JE piston ring set (Part Number JG1004-3189)
TEXT IS BEST
760 six two two 7408
Thanks!
http://sandiego.craigslist.org/csd/pts/4335326997.html
Last edited by KFBhonda; Feb 15, 2014 at 05:36 PM. Reason: San Diego Area
Thread
Thread Starter
Forum
Replies
Last Post
1.8T_EG
Forced Induction
6
Jan 16, 2003 10:06 AM



