Finally got my car back together back in September. Here's a dyno video of the car on low boost (10 lbs)

 

that's quite impressive!

do you have a build thread? I had a similar plan, to do this to my car?

 

I have some pictures, nothing in detail tho. This project took over three years due to previous accord being flooded, but not before spinning bearings and cracking 3 pistons and 4 rods on stock f22b2 bottom end (guess 15 lbs on stock bottom end wasn't a good idea....although my oil pump failed, which is likely the real culprit to spun bearings)

 

That spool tho... 331HP?! Damn dude!

 

Thanks man. Its on low boost until I upgrade the "stage 4" ACT clutch which you can hear slipping in the video. Never again with the ACT, supposed to hold over 400 ft/lb of torque. Looking at Exedy for next time.

 

This is the original car (same engine/trans/turbo as in current car) on 15 lbs only puting down 291 whp and 260 tq. (c/r was 8.2:1 and is now 9.5:1)

 

putting down nice numbers.

 

Thanks man.