JDM RETRACT SIDE MIRRROR BLIND SPOT SOLUTION WITH VID
Thread Starter
Honda-Tech Member
Joined: Mar 2013
Posts: 11
Likes: 0
JDM RETRACT SIDE MIRRROR BLIND SPOT SOLUTION WITH VID
PARTS NEEDED
3/16 FLAT WASHERS
SUPER GLUE:
DRIVER SIDE:
On the DRIVER SIDE I put 3 WASHERS on hole B and 2 washers on HOLE A, on the PASSENGER SIDE I remember I put 5 washers on hole C and did not put any on the others
The goal here is make the PASSENGER SIDE kick more INWARD and the DRIVER SIDE kick more OUTWARD
WASHERS GLUED ON THE DOOR:
DRIVER SIDE NO GAP ON BASE:
PASSENGER SIDE WITH GAP ON BASE BUT VERY MINIMAL:
VIDEO:
http://www.youtube.com/watch?v=ktEBo...ature=youtu.be
3/16 FLAT WASHERS
SUPER GLUE:
DRIVER SIDE:
On the DRIVER SIDE I put 3 WASHERS on hole B and 2 washers on HOLE A, on the PASSENGER SIDE I remember I put 5 washers on hole C and did not put any on the others
The goal here is make the PASSENGER SIDE kick more INWARD and the DRIVER SIDE kick more OUTWARD
WASHERS GLUED ON THE DOOR:
DRIVER SIDE NO GAP ON BASE:
PASSENGER SIDE WITH GAP ON BASE BUT VERY MINIMAL:
VIDEO:
http://www.youtube.com/watch?v=ktEBo...ature=youtu.be
Last edited by TSIKOY; Jan 16, 2014 at 07:51 AM.
Thread
Thread Starter
Forum
Replies
Last Post