Hello, new here, but wondering if there is a link to offset, and what they would look like on a "91 civic hatch". Not trying to be spoon fed, but honda is new to me, and I am sure you all might even know the answer already sort of deal. And I have tried searching. But, NO, luck. I can find wheel spacing but with the wheel set out side of the wheel well, thats not what I am looking for. I am looking for a near flush (set inside wheel well approx 1/2" 1cm would be ideal). I actually want stock appearing steel wheel, but want 15-16 by 7.5 but would prefer 8" wide... Not a big fan of stretch wheels is why the not flush... Any help would be greatly appreciated!

 

I'd say your best bet might be to look through some pic threads and find something that looks like what you want and message the owner about their setup.

https://honda-tech.com/forums/showth...51570&page=115

 

OE wheel was 13X5 ET42, but any offset under 35mm will most likely put the tire outside the fender for reference. Tires wider than a 215 will probably require a fender lip roll as well

 

having the original wheel size helps out tremendously! And I have perused through SO many photos its ridiculous! All the setups I seen had tires stretched, wheels past the fender, or tiny wheels!!!